FML-660 × 1500
รหัสสินค้า: FML-660 × 1500
ข้อมูลเฉพาะสินค้า
- ประเภทสินค้า
- Lathe
- แบรนด์
- FULL MARK
- Series / Family
- FML
- Model
- FML-660 × 1500
- หมวดหลัก
- เครื่องกลึง
- หมวดย่อย
- Horizontal Lathe
เกี่ยวกับสินค้า
| MODEL: FML series | FML-600 (24") | FML-660 (26") | FML-740 (29") | FML-870 (34") |
|---|---|---|---|---|
| General Capacity | ||||
| Center height | 300 mm (11 7/8") | 330 mm (13") | 370 mm (14 3/4") | 435 mm (17") |
| Swing over bed | 600 mm (23 5/8") | 660 mm (26") | 740 mm (29 1/8") | 870 mm (34") |
| Swing over gap | 820 mm (32 1/4") | 880 mm (34 5/8") | 960 mm (37 25/32") | 1100 mm (43") |
| Swing over cross slide | 380 mm (15") | 440 mm (17 3/8") | 520 mm (20 1/2") | 590 mm (23") |
| Center distance | 1500 mm (59.05") | 2000 mm (78.74") | 3000 mm (118") | 4250 mm (167.3") |
| Main Spindle | ||||
| Spindle nose | D1-11 (or A1-11 upon request) | |||
| Spindle bore dia. | Ø 104 mm (4 1/11") | |||
| Taper of spindle bore | 108mm × Ratio 1:20 | |||
| Taper of center | MT5 | |||
| Spindle speed [50Hz] | Standard 25~1200 RPM (12 steps); OPTION: INVERTER VARIABLE SPEED (4 steps); 20~1200 RPM | |||
| Carriage | ||||
| Cross slide travel | 330 mm (13") | 380 mm (15") | 420 mm (16.5") | 550 mm (21.5") |
| Compound rest travel | 230 mm (9") | |||
| Max. size cutting tool | 25×25 mm (1" × 1") | |||
| Tailstock | ||||
| Spindle diameter | 77 mm (3 1/32") | |||
| Spindle travel | 178 mm (7") | |||
| Taper of center | MT5 | |||
| Bed | ||||
| Bed width | 420 mm (16 1/2") | |||
| Bed length | 2590 mm (101.9") | 3090 mm (121.6") | 4160 mm (163.7") | 5700 mm (224.4") |
| Threading & Feeding | ||||
| System | Metric system or Inch system | |||
| Pitch of leadscrew | Ø 38 mm, 6 mm/pitch [Metric], 4TPI [Inch] | |||
| Metric pitches cutting | 0.5~14 mm/pitch (31 kinds) | |||
| Inch threads cutting | 2~56 TPI (45 kinds) | |||
| Module pitches cutting | 0.25~7 M.P. (23 kinds) | |||
| Diametral pitches cutting | 4~112 D.P. (43 kinds) | |||
| Range of longitudinal feeds | 0.03~0.73 mm/rev. 0.0012"~0.0287"/rev. | |||
| Range of cross feed | 0.01~0.3 mm/rev. 0.0004"~0.0118"/rev. | |||
| Power | ||||
| Main drive motor | 15 HP [OPT. INVERTER 20 HP] | |||
| Rapid traverse motor | 1/2 HP | |||
| Coolant pump motor | 1/8 HP | |||
| Floor Dimensions [mm] | 2980/3500/4370/5720 × 1150 | 2980/3500/4370/5720 × 1180 | 2980/3500/4370/5720 × 1220 | 2980/3500/4370/5720 × 1280 |
| Net Weight [kgs] | 3700/3900/4400/4700 | 3900/4100/4600/4900 | 4100/4300/4800/5100 | 4300/4500/5000/5300 |
| Packing size approx. (L×W×H) [mm] | 3120/3640/4580/5850 × 1550 × 1970 | 3120/3640/4580/5850 × 1550 × 1970 | 3120/3640/4580/5850 × 1550 × 1970 | 3120/3640/4580/5850 × 1550 × 1970 |